Low Panel Gate

Our Low Freestanding Pet Gate Panel offers a clean, modern solution for blocking openings 48" or less. The 30" and 32" wide gates feature a solid 1/4" clear acrylic panel that slides securely into a 3/8" thick acrylic single base, creating a stable freestanding barrier. The 36" wide gate includes a hinged panel and also slides into a 3/8" single base for easy placement and stability.

The larger 42" and 48" have a hinged panel and come with (3) lucite feet that screw tight to the panel. With laser cut handles to maneuver the panel, this freestanding pet gate is pure modernity. Each gate is 24" high and comes with stick on floor protectors to prevent wood floor scratching.

-Note when ordering: if you want to assure that your pet will not be able to push the gate, you should order it 3-4" wider than your opening so it can be positioned against the side walls, on the same side of the doorway as the pet. The gate overlapping the sidewalls will make it difficult to push.

Easy Set Up:
-Slide panel into clear base for the 30, 32 & 36" gates.
-Screw/tighten the (3) feet into the panel for the 42 and 48" gates. There are no screw holes on the panel; the screw just tighten to the panel.
-Position gate on same side of room as pet.
-Place gate up against threshold/door molding to prevent your pet from being able to push the gate.

Sizing: 30, 32, 36" 42 and 48" wide.

Included:
1/4" thick acrylic panel gate.
3/8" thick acrylic single base for the 30", 32" & 36" gates.
(3) acrylic feet for the 42" & 48" gates.
Self-adhesive clear rubber feet for bottom of base for use on hardwood or tile floors.

Sizes: 30", 32", 36", 42" and 48" wide.

Dimensions:
30" Width: 30"w x 24"h x 8"d (weight: 14 lbs.)
32" Width: 32"w x 24"h x 8"d (weight: 18 lbs.)
36" Width: 36"w x 24"h x 8"d (weight: 20 lbs.)
42" Width: 42"w x 24"h x 8"d (weight: 24 lbs.)
48" Width: 48"w x 24"h x 8"d (weight: 27 lbs.)

30", 32" & 36" gates have a single base:
Base imension: 18”w x 4”h x 8”d

42" and 48" gates have 3 separate feet as the bases:
Foot Dimensions: 7.5"w x 6.5"h x 10"d

Note: 1/4" to 1/2" tolerance is possible with dimensions and is not considered defective.
Custom sizes available, email customerservice@shophiddin.com

-Note when ordering: If you want to ensure your pet cannot push the gate open, order a gate that is 3–4 inches wider than your opening. This allows the gate to be positioned against the side walls. The overlap with the walls makes it much harder for pets to push the gate.

30, 32 & 36" Gate Assembly:
-Place panel down into single base and place gate on same side of doorway as pet which prevents the pet from pushing the gate.

42 and 48" Gate Assembly:
-Open the gate so it lays flat.
-Place (2) feet towards either end of panel and place 3rd foot at center of panel.
-Tighten the thumbnail screw until it holds the panel upright and in place. There are no screw holes on the panel; the screw just tightens to the panel.

Care Instructions:
-Indoor or Outdoor Use.
-Wipe with soft cloth and soapy water.
-Do not use any chemical cleaners.
-NOT TO BE USED AS A CHILD GATE.

Important for proper set up:
The gate and base should be positioned on the same side of the doorway or opening as the pet so that the pet cannot push the gate thru the opening.

Assembly Instructions for 30, 32 & 36" gates:
1. Remove large acrylic panel and separate T-shaped base, from box.
2. Place T-shape base in the center of the doorway/hall opening that you want to barricade.
3. Slide large panel down into base; adjust gate as needed to adequately block your opening.

Assembly Instructions for 42 and 48" gates:
1. Open the hinged gate panel so it lays flat.
2. Place 1 foot towards end of each panel; these are the end feet.
3. Place 3rd foot at center of panel.
4. Secure all 3 feet by tightening the thumbnail screw until it holds the panel upright and in place. There are no screw holes on the panel; the screw just tightens to the panel.