Low Panel Gate

Our Low Freestanding Pet Gate Panel offers a clean, modern solution for blocking openings 48" or less. The panel gates have a clear hinge in the center that makes the panel easy to store away when not in use. The 30, 32 and 36" gates have a single 18" long base. The larger 42" and 48" come with (3) lucite feet that screw tight to the panel. Laser cut handles allow you to slide the panel for easy passage.
If your dog pushes gates, please order the "Base wth Suction Cups". The cups are removable and only work on ceramic, porcelain, stone, vinyl and very smooth wood floors. They do not work on non-smooth wood, porous tile or carpet.

-Note when ordering without suction cups: Order the gate 3-4" wider than your opening so it can be positioned against the side walls, on the same side of the doorway as the pet. The gate overlapping the sidewalls will make it difficult to push.

Sizing: 30, 32, 36" 42 and 48" wide.

Included with No Suction Cups:
1/4" thick acrylic panel gate.
3/8" thick acrylic single base for the 30", 32" & 36" gates.
(3) acrylic feet for the 42" & 48" gates.
Self-adhesive clear rubber feet for bottom of base for use on hardwood or tile floors.
Included with Suction Cups:
Same as above but base or feet will come with 4 Suction Cups on each.

Sizes: 30", 32", 36", 42" and 48" wide.

Dimensions:
30" Width: 30"w x 24"h x 8"d (weight: 14 lbs.)
32" Width: 32"w x 24"h x 8"d (weight: 18 lbs.)
36" Width: 36"w x 24"h x 8"d (weight: 20 lbs.)
42" Width: 42"w x 24"h x 8"d (weight: 24 lbs.)
48" Width: 48"w x 24"h x 8"d (weight: 27 lbs.)

30", 32" & 36" gates have a single base:
Base imension: 18”w x 4”h x 8”d in 3/8" thick acrylic

42" and 48" gates have 3 separate feet as the bases:
Foot Dimensions: 7.5"w x 6.5"h x 10"d

Note: 1/4" to 1/2" tolerance is possible with dimensions and is not considered defective.
Custom sizes available, email customerservice@shophiddin.com

30, 32 & 36" Gate Assembly:
-Place panel down into 18" base.

42 and 48" Gate Assembly:
-Open the gate so it lays flat.
-Place (2) feet towards either end of panel and place 3rd foot at center of panel.
-Tighten the thumbnail screw until it holds the panel upright and in place. There are no screw holes on the panel; the screw just tightens to the panel.

-Note when ordering with no suction cups: Order the gate 3–4" wider than your opening. This positions the panel ends against the side walls, making it harder for pets to push the gate. Place the gate on the same side of the doorway or opening as the pet so pushing the gate is more difficult

Care Instructions:
-Indoor or Outdoor Use.
-Wipe with soft cloth and soapy water.
-Do not use any chemical cleaners.
-NOT TO BE USED AS A CHILD GATE.

Assembly Instructions for 30, 32 & 36" gates:
1. Remove large acrylic panel and 18" base, from box.
2. Place T-shape base in the center of the doorway/hall opening that you want to barricade.
3. Slide panel down into base.

Assembly Instructions for 42 and 48" gates:
1. Open the hinged gate panel so it lays flat.
2. Place 1 foot towards end of each panel; these are the end feet.
3. Place 3rd foot at center of panel.
4. Secure all 3 feet by tightening the thumbnail screw until it holds the panel upright and in place. There are no screw holes on the panel; the screw just tightens to the panel.